INNOVATIVE POWER & DATA SOLUTIONS

Home > PRODUCT BY CAPABILITY > Eight Power Units
Build your own:
Intercept Interface II TT
Interface II UT
Sort By:
Page of 1
Interface II TT Units
Interface II TT Units
Please call 1-800-521-3175 to Contact Us for Pricing

The Interface II TT is a double sided unit which provides access to a total of eight power receptacles and eight cutouts for telecom plates which are purchased separately. An additional convenience receptacle located on the bottom of the unit is available as an option (see Interface II TT DC units). Two lids open independently from both sides of the table for easy access. Each lid contains
an access slot to allow the cables to exit the unit when in use. Standard finish options include black and silver powder coat, brushed and anodized aluminum and brushed stainless steel. Interface I TT is UL Listed and CSA Certified.
more info
Interface II UT Units
Interface II UT Units
Please call 1-800-521-3175 to Contact Us for Pricing

The Interface II UT provides eight power receptacles and room for numerous data options. Mounted beneath the table surface this unit allows the use of custom finish tops which lie flush with the table surface when closed. Our Trim Pivot Kits provide an elegant solution for framing the table cutout and provide a method to mount a brushed and anodized aluminum lid provided by ECA or use your own wood top to match the veneer of the table. The Interface II undertable power and data unit provides access to 8 power receptacles and cutouts for up to 8 configurable telecom plates. The unit is supplied with a 6 foot power cord with molded 15 Amp plug. It comes standard with a black textured finish. Optional Trim pivot kits and a variety of lids are available as options. CSA Certified. (Telecom plates sold separately)
ECA’s undermount products are meant to be used by manufacturers during the construction process of the furniture. The undertable products mount under a specified hole size and the manufacturer either uses their own custom door hinge mechanisms or uses ECA’s trim kits. When using ECA’s trim kit the inside of the cutout is exposed and therefore needs to be edge banded or finished during the building process. These are not intended to be cut and installed in the field.

Brushed Aluminum Trim Pivot Kit (LPA) and various lid
finishes sold separately, see accessories below.
more info
Intercept Pop-Up Units
Intercept Pop-Up Units
Please call 1-800-521-3175 to Contact Us for Pricing

The Intercept is pop-up unit that is packed with power and data capability. Designed to be easily hid beneath the worksurface, a simple press of the lid lifts it to the table surface. The Intercept is a square unit with eight power receptacles and four telecom plate cutouts spread evenly around all four sides providing easy accessibility to power and data from all sides of the table. Optional decorative lids are available or use your own wood top to match the table veneer. The Intercept is also available in a motorized version which utilizes a switch box to open and close the unit or it can be integrated into a touch panel system. more info
Interface II UT Units with Convenience Outlet
Interface II UT Units with Convenience Outlet
Please call 1-800-521-3175 to Contact Us for Pricing

The Interface II UT provides eight power receptacles and room for numerous data options. Mounted beneath the table surface this unit allows the use of custom finish tops which lie flush with the table surface when closed. Our Trim Pivot Kits provide an elegant solution for framing the table cutout and provide a method to mount a brushed and anodized aluminum lid provided by ECA or use your own wood top to match the veneer of the table. The Interface II undertable power and data unit provides access to 8 power receptacles with 1 Convenience outlet on the underside of the unit and cutouts for up to 8 configurable telecom plates. The unit is supplied with a 6 foot power cord with molded 15 Amp plug. It comes standard with a black textured finish. Optional Trim pivot kits and a variety of lids are available as options. CSA Certified. (Telecom plates sold separately)
ECA’s undermount products are meant to be used by manufacturers during the construction process of the furniture. The undertable products mount under a specified hole size and the manufacturer either uses their own custom door hinge mechanisms or uses ECA’s trim kits. When using ECA’s trim kit the inside of the cutout is exposed and therefore needs to be edge banded or finished during the building process. These are not intended to be cut and installed in the field.
Trim Pivot Assembly and Lids sold separately.
more info